25
7. Use
UP
/DOWN
buttons to set hour then press
ENTER
button to highlight minutes.
8. Use
UP
/DOWN
buttons to set minutes then press
ENTER
button to highlight seconds.
9. Use
UP
/DOWN
buttons to set seconds then press
ENTER
button.
10. Clock is set and Configure menu is displayed.
NOTE:
Year selection will scroll up from 2017. Month selection will scroll from 1 to 12. Day
selection will scroll from 1 to 31.
NOTE:
Hour selection will scroll through 0 to 23. Minute and Second selections will scroll through
0 to 59.
NOTE:
If batteries are removed from wrench for longer than 20 minutes, clock will revert to
default settings and must be re-entered at power on.
Setting Calibration Interval
This function will allow user to set calibration interval for when "CAL NEEDED" message will be displayed.
1. From Configure menu, use
UP
/DOWN
buttons to highlight
SET CAL INTRVAL
selection then
press
ENTER
button.
2. CAL INTERVAL screen is displayed.
3. Use
UP
/DOWN
buttons to change calibration interval.
Selectable Intervals:
•
DISABLED (factory default)
•
3 MON
•
6 MON
•
12 MON
4. Press
ENTER
button to accept selection and exit to Configure menu.
