12
To exit Main menu and return to target torque or angle screen, press
ENTER
button while
EXIT
menu
selection is highlighted.
Target Pre-sets (PSET)
PSET function gives user ability to configure 10 pre-set target torque or target angle settings, each with a
minimum (target), maximum (over range) and batch count value. PSETs are stored in non-volatile memory
so that they are retained while power is off.
NOTE:
After adding a Pre-set (see below), navigate between manual target torque, angle mode
and PSET screen by repeatedly pressing ENTER
button. While PSET screen is
displayed, press UP /DOWN buttons to select additional configured PSETs.
NOTE:
Pre-sets with a non-zero batch count are displayed as 01ofXX.
