20
Toggle Backlight Setup
This function will allow user to enable or disable backlight toggle function. If toggle mode is disabled,
BACKLIGHT
button turns on backlight and it automatically turns off after five seconds following any last
button press. If toggle mode is enabled, a
BACKLIGHT
button press will turn on backlight and it will
remain on until next
BACKLIGHT
button press.
1. From Settings menu, use
UP
/DOWN
buttons to highlight
TOGGLE BACKLIGHT
selection then
press
ENTER
button.
2. TOGGLE BACKLIGHT screen is displayed.
3. Use
UP
/DOWN
buttons to highlight ENABLE or DISABLE (factory default) selection.
4. Press
ENTER
button to accept selection and exit to Settings menu.
NOTE:
Backlight will turn off when wrench powers down either by POWER
button press or
sleep time.
NOTE:
If toggle backlight is enabled and backlight is on, backlight will remain on during and after
applying torque.
Vibrator Configuration
This function will allow user to configure vibrator for On or Off when target is reached for preference and/or
battery power savings.
1.
From Settings menu, use
UP
/DOWN
buttons to highlight
VIBRATOR CONFIG
selection then
press
ENTER
button.
2.
VIBRATOR CONFIG screen is displayed.
3.
Use
UP
/DOWN
buttons to toggle ON or OFF selection.
4.
Press
ENTER
button to accept selection and exit to Settings menu.
