11
not be allowed to hang below the boom
(
Figure 6
).
Figure 6 – Another Acceptable Mounting
Avoid mounting sensors in locations
where they may read from parts of the
boom as shown in Figure 7.
Figure 7 – Poor Mounting
(Sensor Reading off Boom)
General
mounting
rules
for
UC4+
ultrasonic wing sensors:
a)
In its lowest position, the sensor mouth
must be 9 inches or more from the
ground.
b)
The bottom of the sensor must be at least
9 inches in front of the spray nozzles.
c)
The bottom of the sensor must be at least
9 inches above the spray nozzles.
d)
Ensure that there are no obstructions
within a 12-inch diameter circle projected
directly below the center of the sensor.
e)
The sensor should be approximately
vertical at normal operating heights.
Figure 8 – Sensor Mounting Guidelines
A
B
B
D
C
Ultrasonic
Acoustic Cone
Содержание UC4+ Raptor Pro 1200
