35.
Built-In Self Test (BIST)
MN700004 Rev 01
380
On-board Power PHY - Passed
On-board Power CPU - Passed
On-board Power OC - Passed
Temperature Test :
Temperature - Passed
show self-test
The
show self-test
command, in Privileged (Enable) mode, issues a report on the current
built-in test status (obtained by the last BIST).
If
full
is specified, the command issues a full report, comprising the status (
Passed/Failed
) of
each test.
If
full
is not specified, the command issues a brief report, comprising:
•
a notification stating whether problems were encountered;
•
items that failed (if any), with their (
Failed
) statuses.
Command Syntax
device-name
#
show self-test
[
full
]
Examples
1. The following example displays a brief report about the current BIST status, when all
tests resulted with Passed statuses:
device-name
#
show self-test
No problem encountered by BIST
2. The following example displays a brief report about the current BIST status, when the
Crossbar Existence
test resulted with
Failed
status:
device-name
#show self-test
Problem encountered by BIST
---------------------------
CPU Interface Test :
UART Existence - Passed
3. The following example displays a full report about the current BIST status:
device-name
#
show self-test full
Checking current BIST status...
device-name#self-test
Processing BIST by request...
CPU Core Test :
CPU Validation - Passed
CPU Notify RAM Test :
RAM Validation - Passed
CPU Interface Test :
UART Existence - Passed
Testing Switch Core :
Crossbar Existence - Passed