34.
802.1X Port-Based Authentication
MN700004 Rev 01
373
Example 1
device-name
#
show dot1x interface 1/1/5
Control Direction = Both
Authentication Method = Auto
Authentication Type = Single Host
Host Limit = Unlimited
Hosts = 1
Authorized Hosts = 1
UnAuthorized Hosts = 0
=====================================================================
MAC Vlan State RadID Session time ReAuth
---------------------------------------------------------------------
00:40:95:31:80:6D 2 Authenticated 1 00:28:12 00:00:01
Example 2
device-name
#
show dot1x interface 1/1/5 statistic
Total OUT EAPOL Frames 256
EAPOL Packet ID Request 86
EAPOL Packet Request 85
EAPOL Packet Success 85
EAPOL Packet Fail 0
Total OUT Retransmit Radius Frames 170
Total IN EAP Radius Frames 170
Total IN EAPOL Frames 170
EAPOL Start 0
EAPOL LogOff 0
EAPOL Packet ID Response 85
EAPOL Packet Response 85
EAPOL Key 0
EAPOL ASF Alert 0
EAPOL Unknown 0
EAPOL Broken 0
Last EAP Version Received: 1
Last EAPOL Packet Received from: [00:40:95:95:80:31]]
Example 3
device-name
(config-if 1/1/5)#
dot1x
Control Direction = In
Authentication Method = Auto
Authentication Type = Multiple Hosts
Host Limit = Unlimited
Hosts = 1
Authorized Hosts = 1
UnAuthorized Hosts = 0
Displaying the 802.1X Information for all Supplicants
The
show dot1x hosts
command, in Privileged (Enable) mode, displays the 802.1X
information for all supplicants.
Command Syntax
device-name
#
show dot1x hosts