Sdasdasdsdfdsdcdscsdcdcd
cdcsc
8
Nitronic AG
Mattenstrasse 11
2555 Bruegg
Email: [email protected]
Switzerland
Phone: +41 32 373 70 70
Fig. 4
Adjust machine
Insert the cable end to the sensor
With foot
pedal
Without foot pedal
When the cable touches the
activation sensor, the machine
will automatically start the
stripping cycle.
Start the stripping cycle with
the foot pedal
Full strip?
No
Yes
Wait until the stripping
head stops before pulling
out the cable
Wait until the LED is on or the
solenoid air valve is activated
(you hear the air blowing out
the air nozzle). Now pull out the
cable while the LED is on!
End of stripping cycle
Twisting?
(ST215W only)
No
Cleaning cycle
(starts automatically)
Yes
