Sdasdasdsdfdsdcdscsdcdcd
cdcsc
11
Nitronic AG
Mattenstrasse 11
2555 Bruegg
Email: [email protected]
Switzerland
Phone: +41 32 373 70 70
17
30
19
6
Slowly push the big Allen screw
(6)
back and forth. This will cause the four stripping blades to
automatically fit into the tracks on the guide plate
Fig. 9
.
Only now tighten the centering unit.
Fig. 9
Fig. 10
Tighten a bit the screw
(19)
(black)
By rotating the centering scale
(17),
fully open the centering jaws
(25)
and insert the calibrating pin
(30)
.
Then by rotating the centering scale
(17)
close the centering jaws as far as the calibrating pin
(30)
Fig.
10
.
Loosen screw
(19)
(black)
and turn the centering scale
(17)
clockwise to diameter
2.0 mm
. Retighten
screw
(19) (black)
and remove calibrating pin
(30)
.
The ST215 is now ready for use.
Dismantling the centering unit
Loosen screw
(19)
(black) and remove centering scale
(17)
with a slight turning movement
Fig. 11
.
Lift off the O-ring
(20)
and take it out
Fig.
12
.
Fig. 11
Fig. 12
19
20
17
