Sdasdasdsdfdsdcdscsdcdcd
cdcsc
4
Nitronic AG
Mattenstrasse 11
2555 Bruegg
Email: [email protected]
Switzerland
Phone: +41 32 373 70 70
2
5
4
30
31
17
32
Connecting the machine
Connect the machine with the supplied power supply unit to the mains supply and to the "24V DC"
connection. If the power plug is not compatible with your power outlet, please contact your Nitronic
partner or contact us directly.
Connect the machine to your compressed air installation. The supplied compressed air hose is provided
with a coupling on the machine side, the other side is free. On the free side you must fit a coupling that
is compatible with your compressed air installation. The outer hose diameter is 6 mm.
The machine is internally equipped with a pressure regulator, but the inlet pressure must be between
5 and 8 bar. Under no circumstances must the pressure exceed 8 bar!
Connect the foot pedal switch (optional) to the connection „
Foot Pedal
“.
With the foot pedal connected, the activation sensor is inactive! The machine can only be activated
with the foot pedal!
Control Elements
4. Diameter
31.Rotation time / diameter feed rate
5. Stripping head with length scale
30. Counterclockwise / no rotation /
clockwise
2. Length
32. Wayback (ST215W only)
17. Centering (ST215 and ST215W)
Fig. 1
Fig. 2
