Nisca PR53FS, Руководство по эксплуатации

Страница: 27 / 57

4 -
d) Functions of User Mode
Checking the number of cards used: Card Count
Indicates the number of the cards taken- in from the card feeder. It returns to 0
by pressing Clear key.
?
To be used for the control of card consumption.
Total count of the printed frames: Total Count
This is a maintenance counter for the accumulated number of the frames printed.
The value can not be reset.
?
To be used to know approximate time of maintenance operations.
* For the both side printing, Total Count is 2 [frames] against the Card Count
of 1[card].
Adjustment of color: Color Adjustment
Color adjustment is done by adjusting the intensity of Yellow, Magenta and Cyan.
Each value can be adjusted within the range of
±
3. The value increases by
pressing EXE key and decreases by CLEAR key. Standard value is 0
[Example of color adjustment]
The color image to be printed on the card consists of the 3 colors, Cyan C,
Magenta M and Yellow Y. These colors are the complementary colors to Red R,
Green G and Blue B. The following fig. shows the relationship of C.M.Y and R.G.B.
Example) To increase red color:
Decrease the value of Cyan which
is in the complementary to red,
or increase the value of Y and M.
Correlation of RGB and CMY
If there is a customized setting, color tone of Nisca default setting and the
customized setting can be selected with Gamma0 Select menu. Please ask the
dealer for the details.
Fine adjustment of black color: Color Adjustment
?
Black
Adjust the value of Black in the Color Adjustment. The steps are same as the
other color adjustment. To obtain more crisp fine line, increase the value.
Decrease the value when the bold line smudges.
R
C
B G
M
Y