6 -
g
)
How to clean the card transportation rollers
The card transportation rollers are cleaned automatically by using cleaning card of which is
bundled with this sheet and cleaning function on this printer.
Prepare a cleaning card and turn power on the printer
?
Remove the protection sheet on a cleaning card.
Cleaning function is in the USER MODE.
Follow the Procedure below
?
Description
Letters on LCD
1
Press and hold
MENU
Key
User Mode
CLR:Back EXE:Go
2
Push
EXE
key
User Mode
Push MENU KEY
3
Push
MENU
key
Printer Cleaning
Every time MENU key pushed, Letters on the
display change. Keep pushing until the letters
change as on right.
4
Push
EXE
key
Remove Normal Card
Remove the cards from card hopper
5
Push
EXE
key
Set Cleaning Card
Put the cleaning card on card hopper
Watch the position of the card put. See the figure
under part of this sheet.
6
Push
EXE
key
Please Wait..Now Cleaning
Cleaning procedure begins automatically and the
cleaning card will be come out on eject stacker.
Then the LCD shows as on right.
Set Cleaning Card
Put the cleaning card on the card hopper with backside
up and carry out the procedure of 5 and 6 again.
?
Go to procedure 7 when quit the cleaning.
7
Push
MENU
key
Return to Normal Mode
8
Push
EXE
key
Card Empty
9
Put the normal card on the card hopper and push CLEAR
key.
Ready to Print
First, put the cleaning card with sticky side
(black surface) up and get the card into the
printer until card edge reaching the cleaning
roller inside.
Push the card edge slowly, the card will stop
when the card edge reaches the cleaning roller.
Push the card edge
Содержание PR53FS
