Nisca PR53FS, Руководство по эксплуатации

Страница: 54 / 57

10
- c) Troubles which are not displayed on the operation panel
Problem Cause/Countermeasure
Ref.
?
Color drop
Partial drop or discoloration
The dust may disappear after printing.
?
If a dust is on the surface of the card when printing,
the part of the dust remains unprinted
?
Do not use the card having a dust on the face.
?
Do not use the printer in the dusty area.
?
Clean the rollers.
P.33
?
Abnormal coloring of an amorphous area.
?
Grease of the fingertip is transferred to a part of the
card causing abnormal printing.
?
Do not touch the printing surface of the card.
?
A thin unprinted line along the card
transport direction appears.
?
A dust adheres on the print head.
?
Clean the print head.
?
If the problem is not solved by head cleaning, a part
of the heat element of the head is damaged.
?
Replace with the new head.
The damage of the print head is caused by biting a
solid particle between the head and the card while
printing. To avoid this, do not use a dirty card or leave
the ribbon cartridge in the dusty place when taking out
from the printer. If the cartridge is taken out, wind up
the frame that has been exposed on the window before
re-setting it to the printer.
P.36
P.4 0
?
Random bands appears in the direction
of the card transportation.
?
The print head is heavily stained.
?
Clean the print head.
?
More than 20,000 frames are printed.
?
Replace with a new print head.
?
When the print head is replaced, the data is not
installed at the same time.
?
Install the data contained in Floppy Disk of which
come with the head.
?
The print head for replacement comes with each
corresponding Floppy Disk having the same serial
number as the head. Check and make sure that the
Floppy Disk with the same number
is installed. as the print head
P.36
P.4 0
P.4 0