Nisca PR53FS, Руководство по эксплуатации

Страница: 24 / 57

4 -
b) Operation of Normal Mode
When the power is turned ON, the printer is in Normal Mode.
The Power LED (Green) turns ON and the printer status is shown on the LCD panel.
Normal Mode is the mode for printing, and the printer status is shown on the
LCD panel. For example, when the printer is waiting to print, "Ready to Print"
is shown.
If there is any problem to print, error message such as
"Card Empty" or "Ribbon
Empty" appears.
Thus, the mode for printing is called as Normal Mode, and is differentiated from
the User Mode.
Checking "Ready to Print" status
When printing, check that the Ready LED (Green) is ON. At such status, "Ready
to Print" or "Ready to Print/Removable Ribbon" is displayed on the LCD panel.
Recovering from the Error status
When the Error LED (Red) is lit, there is some error in the printer and it can
not operate normally. In such case, the messages on the LCD panel must be
followed. Please refer to Paragraph 10, Countermeasure for Trouble.
After releasing the error, press Clear key to resume to "Ready to Print" .
If "Cannot Recover/Please Reset" appears on the LCD , resolve the trouble and
press Clear key for about 3 second. Release the key after checking that the
display has been changed to "Reset" so that the printer is reset and returned to
the status of after the power ON.
Recovering from the Error status
To pull out the Ribbon Cassette containing the ribbon in the middle of operation,
for example, to change the ribbon type or to check the amount of the
Remaining ribbon, press Menu/Ribbon Change key. The message on the LCD panel ch
anges from "Ready to Print" to "Ready to Print/Removable Ribbon" and the
Ribbon Cassette can be pulled out.
Clearing the Output Data
To erase the output data which is still in the memory of the printer, reset the
printer. Press and hold the
Clear key for about 3 sec. to change the message on
the LCD panel to "Reset" . Release the button after checking the above. The printer
becomes to the status of immediately after the power is turned ON.