Nisca PR53FS, Руководство по эксплуатации

Страница: 22 / 57

3
- d) Connecting the Printer to Computer
USB type interface
Connecting Cable
Shape of the connector on a printer side :B Type
Connect the B type side to the back of a Printer
at the connector with displayed
as shown on right
3
- e) Power ON
?
The electrical rating of power for this printer is alternate power
(AC100V- 240V .50 Hz or 60Hz).
?
Earth must be securely connected for this printer.
?
T he maximum power consumption of this printer is 120W. Avoid power failure
or voltage drop as much as possible.
?
When the power is turned OFF, wait for at least
3 sec. before turning ON again.
?
Check that the power switch is "OFF" (
?
) before
conne cting the power cord to the outlet.
3
- f) Setting after the Power ON
?
Set the Card and Ink Ribbon.
?
5- a) Setting the Card
?
5- b) Setting the Ink Ribbon
?
Set the Operation Panel following the system instructions
?
4- d) [Setting the system environment] in the paragraph of
[Setting in the User Mode]