Nilfisk-Advance Condor XL, Руководство по обслуживанию

Страница: 56 / 233

&RQWURO6\VWHP 6HUYLFH0DQXDO±$GYDQFH&RQGRUŒ;/1LO¿VN(5
Code# Fault Description Correction
14 NC
Glow plug relay K4 coil over
current.
‡
Check K4 relay coil wiring for problems (+ ORN/GRN and
- WHT/ORN).
‡
Check coil resistance. If less than 36 ohms, replace. Also
see diesel glow plug starting circuit electrical ladder detail.
15 C
Scrub cylinder lock solenoid
over current
‡
Check L6 solenoid coil wiring for problems (+ ORN and -
YEL/BLU).
‡
Check coil resistance. If less than 6 ohms, replace. Also
see main scrub on and right scrub brushes deck pressure
electrical ladder detail.
16 NC
Right side scrub/sweep motor
solenoid valve over current
‡
Check L8 solenoid coil wiring for problems (+ ORN and -
BLK/WHT).
‡
Check coil resistance. If less than 6 ohms, replace. Also
see main scrub on and side sweep/right scrub electrical
ladder detail.
17 NC Back-up Alarm over current
‡
Check optional back up alarm wiring for problems (+ ORN/
GRN and - BLU/BLK).
‡
Check horn for short circuit (spec 0.25A at 12V, electronic
alarm) replace as needed.
18 NC
Right side scrub lift solenoid
over current
‡
Check L9 solenoid coil wiring for problems (+ ORN and -
GRN/VIO).
‡
Check coil resistance. If less than 6 ohms, replace. Also
see main scrub and right side scrub lift electrical ladder
detail.
19 NC Horn over current
‡
Check H4 horn wiring for problems (+ ORN/GRN and -
WHT/YEL).
‡
Check horn for short circuit (spec 4A @ 12V) replace as
needed.
20 NC
Left turn signal lamp over
current
‡
Check left turn signal wiring for problems (+ YEL and -
BLK).
‡
Check lamp for short (see the I/O table for circuit spec).
21 NC
Right turn signal lamp over
current
‡
Check right turn signal wiring for problems (+ GRN and -
BLK).
‡
Check lamp for short (see the I/O table for circuit spec).
22 NC Head and tail lamp over current
‡
Check head and tail lamp wiring for problems (+ BRN,
YEL/RED, ORN/BLU and - BLK).
‡
Check lamps for short (see the I/O table for circuit spec).
23 NC Left stop lamp over current
‡
Check left stop lamp wiring for problems (+ ORN/BRN and
- BLK).
‡
Check lamps for short (see the I/O table for circuit spec).
24 NC Right stop lamp over current
Same as left stop lamp just different wire color (+ YEL/RED
and - BLK).
25 C
20A Circuit breaker CB1 over
current
Control board has sensed open circuit fault for CB1 power
for head/tail and turn signal lamps. Check for GRA/RED wire
shorted to ground.
26 C
20A Circuit breaker CB2 over
current
Control board has sensed open circuit fault for CB2 power
for mist pump (M5) and (M8) wash hose pump. Check for
BLU wire shorted to ground.