Nilfisk-Advance Condor XL, Руководство по обслуживанию

Страница: 62 / 233

(OHFWULFDO6\VWHP
62
6HUYLFH0DQXDO±$GYDQFH&RQGRUŒ;/1LO¿VN(5
DPS)XVH)
The
100-amp Fuse F1
is tied up with the engine harness connectors
and can be accessed by tipping out the recovery tank.
7URXEOHVKRRWLQJ
Problem Cause Correction
No power to the
machine The 100-amp fuse
F1
is
open.
Replace the fuse.
No machine
systems will operate Main power relay K1 coil
over current (fault code
02
displayed)
‡
Check K1 relay coil wiring for problems (+ ORN/
GRN and - BLU/GRN).
‡
Check coil resistance. If less than 36 ohms,
replace. Also see main power distribution electrical
ladder detail. (Spec 0.29A @ 12V). Replace as
necessary.
No glow plug icon
displayed on LCD
(diesel engine only) Glow plug relay K4 coil
over current (fault code
14
displayed)
‡
Check K4 relay coil wiring for problems (+ ORN/
GRN and - WHT/ORN).
‡
Check coil resistance. If less than 36 ohms,
replace. Also see diesel glow plug starting circuit
electrical ladder detail.
Fault code
20
displayed
Left turn signal lamp over
current
‡
Check left turn signal wiring for problems (+ YEL
and - BLK).
‡
Check lamp for short (see the I/O table for circuit
spec).
Fault code
21
displayed
Right turn signal lamp over
current
‡
Check right turn signal wiring for problems (+ GRN
and - BLK).
‡
Check lamp for short (see the I/O table for circuit
spec).
Fault code
22
displayed
Head and tail lamp over
current
‡
Check head and tail lamp wiring for problems
(+ BRN, YEL/RED, ORN/ BLU and - BLK).
‡
Check lamps for short (see the I/O table for circuit
spec).
100-amp
Fuse F1