Nikon XT V 160 Скачать руководство пользователя страница 15

Страница: 15 / 94

Important health and safety information

XT V 160 X-ray System

XTM0011-F2

WARNING: X-RAY PROTECTION

DO NOT DRILL OR SCREW INTO ANY PART OF THE CABINET

DO NOT REMOVE ANY PART OF THE CABINET

DO NOT MODIFY ANY PART OF THIS EQUIPMENT

Safety warning label fitted on removable radiation protection covers.

SAFETY WARNING

THIS IS A RADIATION PROTECTION COVER

X-rays must not be generated with this cover removed

Only trained or qualified personnel to remove

If in doubt contact X-Tek Systems Ltd.

Warning label placed on the radiation protective lead glass window in the operator
door.

RADIATION PROTECTIVE GLASS

DO NOT REPLACE

CONTACT X-TEK SYSTEMS LTD.

Earth warning label located adjacent to the machine identification label.

WARNING

THIS SYSTEM HAS HIGH PROTECTIVE CONDUCTOR CURRENTS

3.5 mA < I

< 10 mA

SYSTEM MUST BE CONNECTED VIA EITHER PERMANENT FIXED

WIRING OR A SUITABLE INDUSTRIAL PLUG AND SOCKET

Содержание XT V 160































































































Результаты поиска

Содержание XT V 160

Отзывы:

Бренды по названию

Популярные бренды

Nikon XT V 160, Руководство оператора

Результаты поиска

Содержание XT V 160

Отзывы:

Бренды по названию

Популярные бренды