Nikon SB-26 - Speedlight, Инструкция по эксплуатации

Страница: 42 / 75

83 82
Chapter
3
5 Push  button for a test firing (see page 110) when
you are not sure whether subject is within the flash
shooting range.
If ready-light
 blinks for a few seconds after test firing,
flash has fired at its maximum output but light might not
have been sufficient. Select a wider aperture or move closer
to subject.
6 Look into the camera viewfinder, compose and lightly
the press shutter release button to confirm that subject
is in focus.
Check that ready-light is on in the camera’s viewfinder
g or
on the SB-26 Â .
F90X/N90s’ viewfinder
Non-TTL Auto Flash A Mode
1 Choose u position (flash mode
selector). Confirm A appears in
the LCD panel.
2 Choose W position (flash
sync mode selector*).
* q position is used for Rear-Curtain Sync
Flash, and only with the F5, F90X/N90s, F90-
Series/ N90, F70-Series/N70, F4-Series,
F-801/N8008, and F-801s/N8008s. For details,
see page 105.
3 Set ISO film speed and position
the built-in zoom head.
For instructions, see “Setting ISO Film
Speed (Manual Adjustment),” pages
27 to 28, and “Setting Zoom-Head
Position (Manual Adjustment),” pages
29 to 30.
4 Set desired aperture in the SB-26’s LCD panel, then set again on the cam-
era.
For instructions, see “Setting Aperture Value (Manual Adjustment),” pages 28 to
29.
Indicator bars
/ show a appropriate shooting distance range.
SB-26 (E) 03.1.14 7:16 PM Page 82