Nikon SB-26 - Speedlight, Инструкция по эксплуатации

Страница: 39 / 75

77 76
Chapter
3
TTL Auto Flash
H
Mode: For FA, FE2, FG and Nikonos V Users
Choosing A Flash Method
FA, FE2, FG or Nikonos V users can use the SB-26
Speedlight to perform Standard TTL Flash, for fully auto-
matic though-the-lens (TTL) control of flash exposure.
Standard TTL Flash can be performed by setting the
SB-26 at p . In Standard TTL Flash, the flash output level
is controlled by the Speedlight to correctly expose subject.
Set Up and Practice
Before proceeding:
E ATTACH SPEEDLIGHT TO CAMERA.
E TURN ON BOTH SPEEDLIGHT AND CAMERA.
E USE FILM WITH A SPEED BETWEEN ISO 25 AND ISO
400.
Setting Up SB-26
1
Flash mode selector
at TTL Auto
2
Flash sync mode
selector at NORMAL
3
ISO speed
of film in
use
4
Zoom-head position
7
Aperture
value
Caution
Use the SB-26 exclusively for on-land condi-
tions; it cannot be used in underwater conditions.
Always keep the unit away from salt water, rain or
water splashes.
10 Fully depress the shutter release button to fire flash.
11 Recheck ready-light to see if it is blinking.
If ready-light blinks for a few seconds after shooting, the
flash has fired at its maximum output but the light may have
been insufficient.
Reconfirm shooting distance and, if necessary, move closer
to the subject or select a wider aperture (in aperture-priority
auto manual exposure mode) to compensate underexpo-
sure.
Firing Flash
9 Look into camera viewfinder, compose and lightly
press the shutter release button.
Confirm ready-light has come on and subject is in focus.
Confirm ready-light is on in the camera’s viewfinder
g or on
the SB-26 Â .
Check whether subject is in focus by using the in-focus
indicator
! in the camera’s viewfinder
TTL Auto Flash
H
Mode: For F-401/N4004 and F-401s/N4004s Users
SB-26 (E) 03.1.14 7:16 PM Page 76