Nikon SB-26 - Speedlight, Инструкция по эксплуатации

Страница: 20 / 75

39 38
Confirming Settings
9 Look into camera viewfinder, compose and lightly
press the shutter release button.
Use AE-L (Auto Exposure Lock) on the camera to capture
exact exposure information for your picture composition
(except when in manual exposure mode).
Confirm controlled aperture and shutter speed. These also
appear in the camera’s LCD panel.
The aperture in use (shown in the viewfinder) and shooting
distance indicator bars
/ appear in the SB-26’s LCD
panel. Over-/Underexposure warning (background
exposure)
For overexposure alert, HI or a “+ (positive)” value
appears in the camera’s viewfinder and LCD panel.
For underexposure, electronic analog displays (in
viewfinder and LCD panel) show Lo or a “– (negative)”
value.
Chapter
3
TTL Auto Flash H Mode: For F5, F90X/N90s, F90-Series/N90 and F70-Series/N70 Users
If Wide-Area focus is set on the camera, it automati-
cally switches over to Spot Area focus when the
SB-26 is turned on. In this case,
blinks in the LCD
panel, and appears inside the viewfinder.
Setting Up Your Camera
6 Select one of the following exposure modes:
a. Programmed auto (P or Ps)
b. Shutter-priority auto (S)
c. Aperture-priority auto (A)
d. Manual exposure mode (M)
7 Select a metering system:
a. Matrix metering system
b. Center-Weighted metering system
c. Spot metering system
8 Perform other settings:
a. For programmed auto , set lens to minimum aperture
(highest f-number).
b. For shutter-priority auto , set lens to minimum aper-
ture (highest f-number), then set desired shutter
speed*.
c. For aperture-priority auto , set desired aperture.
d. For manual exposure mode , set desired shutter
speed* and aperture.
* Camera automatically shifts to the fastest synchronization speed if you choose
a speed that is not within the synchronization range.
Selecting an exposure-metering system on the F5, F90X/
N90s, F90-Series/N90 and F70-Series/N70 camera
For 3D Multi-Sensor Balanced or Multi-Sensor Balanced
Fill-Flash, choose a meter to measure background expo-
sure that most effectively meets the photo requirements
you with to achieve. (With F5, Standard TTL Flash will
always performs when Spot Metering is selected.)
Quick reference on the relationship between usable
apertures and flash shooting distance
Use the table on page 146 in this instruction manual.
SB-26 (E) 03.1.14 7:16 PM Page 38