![background image](http://html1.mh-extra.com/html/nikon/lv-econ/lv-econ_instructions-manual_1690699012.webp)
10
Device Connections
This section describes the procedures to connect this product with motorized devices and light
sources. Refer to the instructions below before connecting devices. For detailed information about
installing, assembling, and connecting devices, refer to the instruction manuals for such devices.
WARNING
•
Before connecting devices, be sure to read the WARNING and CAUTION at the
beginning of this instruction manual and follow the instructions written therein.
•
To prevent electrical shock and fires, always turn off the power switch (flip it to the
“ ” side) and unplug the power cord from the outlet before connecting devices.
•
For detailed information about installing, assembling, and connecting devices, refer to
the instruction manuals for such devices.
CAUTION
•
Be careful not to pinch your fingers or hands during assembly.
•
Handle the product carefully and do not subject it to a strong physical shock.
•
Make sure cables between devices are routed properly. Do not bring the cables into
contact with the lamp house or the illuminator. When the diascopic illumination is
used and a cable comes into contact with the lamp house, the cable sheath may melt
and it results in an electrical shock or fire.
CAUTION
•
Software setup work for the microscope system
When the microscope is assembled or the configuration of the microscope is changed,
perform the software setup works for various settings of the microscope via a PC by
using the software, “LVSetup,” in “LV Series Support Tools” provided with this
product.
In the setup works, information for the devices and parts (objectives, filter cubes,
illuminator, and so on) is registered and interlock controls for such devices are
specified. Make sure to perform the setup works to use the microscope system
correctly.
For details about operations and setup works of “LVSetup,” see “LV Series Support
Tools software manual.”
Содержание LV-ECON
Страница 1: ...LV ECON E Controller Instructions M374 E 07 1 NF 2 2 3 ...
Страница 2: ......