Nikon LV-ECON, Инструкция по эксплуатации

Страница: 16 / 59

14
2
To Attach ad Connect with the Motorized DIC Module (Nosepiece)
To attach and connect with the motorized DIC module (nosepiece)
The motorized DIC nosepiece (LV-MDIC) can be attached on the LV-FMA motorized focusing
module (or a device manufactured by other company). This section shows the installation procedure
to the LV-FMA motorized focusing module. To install the product onto other device, refer to the
following explanation as a guide and take enough care for the installation.
1 Check that the LV-FMA is attached on the LV-DIA or the LV-EPI correctly.
2 When the LV-FMA and the LV-ECON is connected, press the "0" side of the power switch
to turn off he LV-ECON.
3 If any device such as a nosepiece or an illuminator is attached to the LV-FMA, detach all
devices.
4 Unscrew four fixing screws with a hexagonal wrench (size: 3 mm) to detach the arm of the
LV-FMA. Be careful not to fall the arm.
* The detached screws can be used fir fixing the LV-MDIC. (Same screws come with the
LV-MDIC.)
5 Mount the LV-MDIC on the LVFMA in place of the arm and fix it with four screws. The
four screws must be tightened with a 3 mm hexagonal wrench in the order presented in the
picture below.
* Be sure to keep the order below to insure accuracy.
Arm
LV-FMA
Fixing screws (4 pieces)
D o n o t t o u c h t h e h e i g h t a d j u s t m e n t p a r t
w h e n c a r r y i n g t h i s p r o d u c t .
LV-DICA NOSEPIECE
D o n o t t o u c h t h e h e i g h t a d j u s t m e n t p a r t
w h e n c a r r y i n g t h i s p r o d u c t .
3 4
Either order
will do.
1 2
Side view Top view
LV-FMA
Fixing screws (4 pieces)
LV-MDIC