38
9
Operation for the Illumination
To light up/down the illumination and to adjust the
brightness, operate the episcopic illumination controls
(EPI) or the diascopic illumination controls (DIA).
To light up/down the illumination
To light up/down the illumination, operate the EPI button
or the DIA button. Each time the button pressed, the
illumination turns on or off. When the illumination turns
on, the corresponding indicator turns on (or blinks).
Indicator
EPI + DIA
EPI
DIA
Illuminator selection
Both (simultaneous illumination of
episcopic and diascopic)
Episcopic illumination only
Diascopic illumination only
To light up/down the illumination
Episcopic and diascopic illuminations
are controllable individually.
Illumination controls (EPI / DIA)
Interlock function
The illumination is turned on/off automatically and the brightness is controlled automatically when
one of the following operations is performed: a set-up memory button is pushed, the microscopy
method is changed with the interlock function enabled, or objectives are changed with the interlock
function enabled.
The registration to the set-up memory and the interlock function settings are specified with
“LVSetup.” For detailed information, refer to “LV Series Support Tools software manual.”
Simultaneous illumination settings
When you don’t need the simultaneous illumination of episcopic and diascopic illumination, you
can disable the simultaneous illumination by using “LVSetup.” In this setting, the episcopic
illumination or the diascopic illumination will be selected exclusively.
For details about the settings, refer to “LV Series Support Tools software manual.”
Содержание LV-ECON
Страница 1: ...LV ECON E Controller Instructions M374 E 07 1 NF 2 2 3 ...
Страница 2: ......