Chapter 3
Individual Operations
84
Indiv
idua
l
Op
eratio
n
s
1
Display Panel Details
The 2-line, 24-character fluorescent display panel on the front of the main body can display the following information:
(1) Power
ON
display
When the power is turned on, operation progress is
displayed.
_
N i - E
_
V x . x x _ x x x x . x x x x . F 1
D a t a
_
L o a d i n g . . .
Top: Model name, firmware version
Bottom: Program startup progress
(2) Motorized device initialization display
The twelve dots displayed to the right of “Initializing”
indicate the connection status or initialization status of
motorized devices.
Motorized device not connected:
Dots displayed
Motorized device connected and initializing: No dots
Motorized device connected and initialized: Dots displayed
_
N i - E
_
V x . x x _ x x x x . x x x x . F 1
I n i t i a l i z i n g . . . . . . . . . . . .
Top: Model name, firmware version
Bottom: Motorized device initialization progress
Each dot represents a motorized device as shown below.
Initialization indicator dots and corresponding devices
Dot Position
Motorized Device
Dot Position
Motorized Device
1
(leftmost)
Z-axis (main body's elevating section)
7
Motorized Quadrocular Tilting Tube
(optical path switching part)
2 DIA
field
diaphragm
8
Motorized DSC zooming port for quadrocular
tube
3
Motorized XY stage (X)
9
Motorized ND filter wheel
4
Motorized XY stage (Y)
10
Motorized epi-fluorescence cube turret 1
(1st layer)
5 Motorized
universal
condenser
11
Motorized epi-fluorescence cube turret 2
(2nd layer)
6
DIA aperture diaphragm
12
Motorized excitation filter wheel
(3) Initialization completion display
Either “Microscope state” or “FUNCTION button function” can be displayed on the display panel.
When the initialization is completed, pattern 1 of the “microscope state" is displayed first.
Press the DISPLAY SWITCH button on the front side of the Ni-E main body to switch the “microscope state” and
“FUNCTION button's function” display.
“Microscope state” display
Varies depending on connected motorized devices and has nine patterns. (See “Microscope State Display” on the
next page.)
“FUNCTION button's function” display
As factory default, rotation of a condenser, excitation filter
wheel, and a barrier filter wheel is set as the FUNCTION
button's function, and thus the display will be as shown on
the right.
_ _ _ _
C O N +
_ _ _ _
E X +
_ _ _ _ _
B A +
C O N -
_ _ _ _
E X -
_ _ _ _ _
B A -
FUNCTION button's function display
(factory default setting)
After a “LOAD MODE” function is set and registered with a
FUNCTION button, the registered mode name will be
displayed. Mode names, MD1 through MD6 are those set
as factory default. Up to four alphanumeric characters can
be used for the name and the name can be changed as
you wish. When the mode name has been changed, new
mode name is displayed.
(See “19.1 MODE” for the details on the mode.)
_ _ _ _
M D 2
- _ _ _ _
M D 4
_ _ _ _ _
M D 6
M D 1
- _ _ _ _
M D 3
_ _ _ _ _
M D 5
Displaying the mode name when the
“LOAD MODE” function has been set to a
FUNCTION button
Содержание ECLIPSE Ni-E
