manualshive.com logo in svg

Nikon Eclipse 50i POL, Инструкция по эксплуатации

Поделиться
Скачать
Nikon Eclipse 50i POL Скачать руководство пользователя страница 3

 

1 

Preface

 

Thank you for purchasing this Nikon product. 
This instruction manual is intended for users of the Nikon’s Polarizing Microscope ECLIPSE 50i POL. 
To ensure correct use, please read this manual carefully before operating the product. 

 

• 

No part of this manual may be reproduced or transmitted in any form without the prior consent of Nikon. 

• 

The contents of this manual are subject to change without notice. 

• 

Every effort has been made to ensure the accuracy of this manual. If you find that any portion of this 
manual is unclear or incorrect, please contact your nearest Nikon representative. 

• 

This manual may describe products not included in the set purchased. 

• 

Also be sure to read the manuals for any other products that you are using with this system (the super 
high-pressure mercury lamp power supply, high-intensity light source, and such). 

 

 

WARNING and CAUTION Symbols 

Although Nikon products are designed to provide the utmost safety during use, incorrect usage or failure to follow the 
safety instructions provided may cause personal injury or property damage. Damage or injury that may occur due to 
mishandling is unwarranted. To ensure correct use, read the instruction manual carefully and thoroughly before using 
the instrument. Do not discard the manual; keep it handy for easy reference. 
Safety instructions within this manual are accompanied by the following symbols to highlight their importance. For 
your safety, always follow the instructions accompanying these symbols. 

 

 

 

Symbol Meaning 

 

 

Disregarding instructions accompanying this symbol may lead to serious injury or 
death. 

 

 

Disregarding instructions accompanying this symbol may lead to injury or property 
damage. 

 

 

 

 

 

 

WARNING

 

CAUTION

 

Содержание Eclipse 50i POL










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды