Nikon Eclipse 50i POL, Инструкция по эксплуатации

Страница: 24 / 73

Chapter 2 Microscopy
2.4 Episcopic Microscopy (with the Epi Illuminator Option)
22
2.4
Episcopic Microscopy (with the Epi Illuminator
Option)
You can perform the episcopic microscopy with the epi illuminator option.
Before the microscopy
•
If the cumulative lit-on time has exceeded the average operation life for lamps
of its kind, replace the lamp.
1
Turn off the power switch of the
microscope.
⇒ P.29
• If the power of the microscope is supplied, the
diascopic illumination will be lit. If you wish to
use the epi-illumination and the diascopic
illumination simultaneously, see “2.1 Diascopic
Bright-field Microscopy” to adjust the diascopic
illumination.
2
Set the optical path to make
100% light go into the binocular
eyepiece when using the
trinocular eyepiece tube.
3
Push in the analyzer slider on the
polarizing intermediate tube to
remove the analyzer from the
optical path.
Push the power
switch to the “O”
position.
Set the optical
path to make
100% light go
into the binocular
part
Remove the
analyzer from the
optical path.