36
Scene Mode (Shooting Suited to the Shooting Conditions)
y
M
X
Night landscape
•
On the screen displayed when
X
Night landscape
is selected, select
u
Hand-held
(default setting) or
w
Tripod
.
•
u
Hand-held
(default setting):
- Press the shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
•
w
Tripod
:
- One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
- Vibration reduction is disabled regardless of the
Vibration reduction
setting
171) in the setup menu.
- See “Using a Tripod” (
23) when using a tripod.
y
M
k
Close-up
On the screen displayed when
k
Close-up
is selected, select
Noise reduction burst
or
Single shot
.
•
Noise reduction burst
: This enables you to shoot a sharp image with a minimum of
noise.
- Press the shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
•
Single shot
(default setting): Saves images with emphasized outlines and contrast.
- One image is captured when the shutter-release button is pressed all the way.
•
The focus mode (
61) setting is changed to
D
(macro close-up) and the camera
automatically zooms to the closest position at which it can focus.
•
You can move the focus area. Press the
k
button, use the multi selector
HIJK
or
rotate it to move the focus area, and press the
k
button to apply the setting.
Downloaded from