200
Troubleshooting
The battery
inserted in the
camera cannot
be charged.
•
Confirm all connections.
•
When connected to a computer, the camera may not charge
for any of the reasons described below.
-
Off
is selected for
Charge by computer
in the setup
menu.
- Battery charging stops if the camera is turned off.
- Battery charging is not possible if the camera’s display
language and date and time have not been set, or the
date and time were reset after the camera’s clock battery
was exhausted. Use the Charging AC Adapter to charge
the battery.
- Battery charging may stop when the computer enters
sleep mode.
- Depending on the computer specifications, settings, and
status, battery charging may not be possible.
–
–
The monitor is
hard to see.
•
The surrounding area is too bright.
- Move to a darker place.
- Use the viewfinder.
•
Adjust the screen brightness.
The viewfinder
is hard to see.
•
Adjust the diopter of the viewfinder.
•
Adjust the screen brightness.
O
flashes on
the screen.
•
If the camera clock has not been set,
O
flashes on the
shooting screen, and images and movies saved before the
clock is set are dated “00/00/0000 00:00” and “01/01/2018
00:00” respectively. Set the correct time and date for
Time
zone and date
in the setup menu.
•
The camera clock is not as accurate as ordinary watches or
clocks. Periodically compare the time of the camera clock
with that of a more accurate timepiece and reset as required.
Date and time
of recording are
not correct.
No information
displayed on
the screen.
Shooting and photo information may be hidden. Press the
s
button until information is displayed.
Date stamp
not available.
Time zone and date
has not been set in the setup menu.
Date not
stamped on
images even
when
Date
stamp
is
enabled.
•
The current shooting mode does not support
Date stamp
.
•
A function that restricts the
Date stamp
function is
enabled.
•
The date cannot be stamped on movies.
Problem
Cause/Solution
A
Downloaded from
