197
Error Messages
Set the focus-mode
selector to MF.
When
Clean HDMI output
is set to
On
and the camera
is connected to an HDMI-compatible device, set the
focus-mode selector to
r
.
Memory contains no
images.
Insert a memory card that contains images.
File contains no
image data.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to
create or edit this file.
–
All images are
hidden.
•
There are no images available for a slide show, etc.
•
There are no images that can be displayed on the
image selection screen for deletion.
–
This image cannot be
deleted.
The image is protected.
Disable protection.
Raise the flash.
•
When the scene mode is
Scene auto selector
, you
can capture an image even if the built-in flash is
lowered but the flash will not fire.
•
When the scene mode is
Night portrait
or
Backlighting
with
HDR
set to
Off
, you must raise
the built-in flash to capture an image.
Turn the camera off
and then on again.
A lens error occurred. Do not apply force to the lens.
Turn the camera off and then on again to return the lens
to normal operation. If the error persists after turning
the camera off and on, contact your retailer or Nikon-
authorized service representative.
Speedlight setting
error
A Speedlight function that cannot be used with the
camera is set. Change the Speedlight setting.
Communications
error
An error occurred while communicating with the
printer.
Turn the camera off and reconnect the USB cable.
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery,
and turn the camera on. If the error persists, contact
your retailer or Nikon-authorized service representative.
Display
Cause/Solution
A
Downloaded from
