217
ML-L7 Remote Control
6
Press and hold (for at least three seconds) the power button on
the remote control.
•
Pairing starts for the camera and remote control. While the process is being
performed, the status lamp on the remote control flashes about every 0.5 second.
•
When pairing is complete, a connection is
established between the camera and the remote
control. When you enter shooting mode, the
Z
icon is displayed on the shooting screen.
•
If a pairing failure message is displayed, perform
the procedure again from step 5.
Switching the Connection to a Smart Device
•
Switch the connection from
Remote control
to
Smart device
in
Choose
connection
in the camera network menu (
•
When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device, the
s
icon is displayed on the
shooting screen.
•
See the included “SnapBridge Connection Guide” when establishing a wireless
connection with a smart device for the first time.
1400
1400
25m 0s
25m 0s
1/250
1/250
F5.6
F5.6
Downloaded from