Nihon Bisoh BISOMAC308, Руководство оператора, Страница: 54 / 58

Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
4. ASSURE THAT THE WIRE ROPE IS LONG ENOUGH to reach to the lowest
possible landing.
5. CLEAN AND LUBRICATE WIRE ROPE in accordance with the wire rope
manufacturer’s instructions.
6. INSPECT WIRE ROPE IN ACCORDANCE WITH MANUFACTURER’S
INSTRUCTIONS. DO NOT USE WIRE ROPE THAT IS KINKED,
BIRDCAGED, CORRODED, UNDERSIZED, OR DAMAGED IN ANY WAY.
Do not expose wire rope to fire, undue heat, corrosive atmosphere, electricity,
chemicals or damage.
7. WIRE ROPES USED WITH TRACTION HOISTS MUST HAVE PREPARED
ENDS. Follow hoist manufacturer’s recommendations.
8. USE THIMBLES AT ALL WIRE ROPE SUSPENSION TERMINATIONS.
9. USE J-BOLT WIRE ROPE CLAMPS OR SWEDGE FITTINGS. DO NOT USE
U-BOLT CLAMPS.
10. TIGHTEN THE J-BOLT WIRE ROPE CLAMPS i n accordance with the
manufacturer’s instructions.
C. POWER SUPPLY FOR MOTORIZED EQUIPMENT:
1. USE PROPERLY GROUNDED ELECTRICAL POWER CORDS. Protect them
with circuit breakers.
2. USE POWER CORDS AND AIR HOSES OF THE PROPER SIZE THAT ARE
LONG ENOUGH
for the application.
3. POWER CORD and AIR HOSE CONNECTIONS MUST BE RESTRAINED to
prevent separation.
4. USE STRAIN RELIEF DEVICES TO ATTACH POWER CORDS AND AIR
SUPPLY HOSES TO THE PLATFORM, to prevent them from separation.
5. PROTECT POWER CORDS AND AIR HOSES FROM SHARP EDGES.
6. USE GROUND FAULT CIRCUIT INTERRUPTER (GFCI) WITH POWER
TOOLS.
D. FALL ARREST EQUIPMENT:
1. EACH PERSON ON AN ADJUSTABLE SUSPENDED SCAFFOLD must be
attached to an independent fall arrest system.
2. EACH VERTICAL LIFELINE SHALL BE ATTACHED IN ACCORDANCE
WITH MANUFACTURER’S INSTRUCTIONS to a separate anchorage capable of
supporting a minimum of 5000 pounds (2267 kg) or an anchorage designed by a
qualified person.
3. DO NOT WRAP LIFELINES AROUND STRUCTURAL MEMBERS unless
lifelines are protected and a suitable anchorage connection is used.
4. PROTECT LIFELINES AT SHARP CORNERS AND EDGES to prevent chafing.
5. RIG FALL ARREST SYSTEMS to minimize free fall.
6. INSTALL VERTICAL LIFELINES SO THEY HANG FREELY.
7. USE LIFELINES that are compatible with the rope grab.
8. INSTALL ROPE GRAB IN ACCORDANCE WITH THE MANUFACTURER’S
RECOMMENDATIONS. Rope grab must be properly oriented.
9. KEEP ROPE GRAB POSITIONED ABOVE YOUR HEAD.
10. UTILIZE FULL BODY HARNESSES of the proper size and fit.
11. UTILIZE SHOCK ABSORBING LANYARD attached to the D-ring at the center of
your back between the shoulder blades.