Nihon Bisoh BISOMAC308, Руководство оператора, Страница: 53 / 58

Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
L. ADJUSTABLE SUSPENDED SCAFFOLD SYSTEMS are to be installed and used in
accordance with the manufacturer’s recommended procedures.
M. ADJUSTABLE SUSPENDED PLATFORMS MUST NEVER BE OPERATED
NEAR LIVE POWER LINES unless proper precautions are taken. Contact the power
service provider for advice.
N. ALWAYS UTILIZE FALL ARREST EQUIPMENT when working on adjustable
suspended scaffolds or when working near unguarded edges.
O. DO NOT WORK FROM, INSTALL OR MOVE ADJUSTABLE SUSPENDED
SCAFFOLDS if you are sick or impaired in any way.
P. DO NOT WORK ON ADJUSTABLE SUSPENDED SCAFFOLDS when under the
influence of alcohol or drugs.
Q. DEBRIS SHOULD NOT BE STORED OR ALLOWED TO ACCUMULATE ON A
PLATFORM.
R. INDEPENDENT ADJUSTABLE SUSPENDED SCAFFOLDS ARE TO BE
POSITIONED SO AS TO AVOID OVERLAPPING OR POSSIBLE
INTERFERENCE FROM ANOTHER SCAFFOLD.
II. GUIDELINES FOR ERECTION AND USE OF ADJUSTABLE SUSPENDED
SCAFFOLD SYSTEMS
A. RIGGING:
1. UTILIZE FALL PROTECTION EQUIPMENT when rigging near unguarded
edges.
2. SUPPORTING DEVICES must be capable of supporting the hoist rated load with a
safety factor of four.
3. ALL OVERHEAD RIGGING must be secured from unwanted movement in any
direction.
4. COUNTERWEIGHTS USED WITH OUTRIGGER BEAMS must be of a
non-flowable material and must be secured to the beam to prevent accidental
displacement.
5. OUTRIGGER BEAMS THAT DO NOT USE COUNTERWEIGHTS must be
installed and secured to the roof structure with bolts or other direct connections. Direct
connections shall be evaluated by a competent person.
6. TIE BACK ALL TRANSPORTABLE RIGGING DEVICES. Tieback shall be
equivalent in strength to the suspension ropes.
7. INSTALL TIEBACKS AT RIGHT ANGLES TO THE FACE OF THE
BUILDING and secure them without slack, to a suitable anchor capable of supporting
the hoist rated load with a safety factor of four.
8. IN THE EVENT THAT TIEBACKS CANNOT BE INSTALLED AT RIGHT
ANGLES, two tiebacks at opposing angles must be used to prevent movement.
9. RIG AND USE HOISTING MACHINES DIRECTLY UNDER THEIR
SUSPENSION POINTS to prevent movement or side loading.
B. WIRE ROPE AND HARDWARE:
1. USE ONLY WIRE ROPE AND ATTACHMENTS specified by the hoisting
machine manufacturer.
2. HANDLE WIRE ROPE WITH CARE. Always use gloves.
3. COIL AND UNCOIL WIRE ROPE in accordance with manufacturer’s instructions
in order to avoid kinking or damage.