Nihon Bisoh BISOMAC308 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 58

Nihon Bisoh BISOMAC308 Скачать руководство пользователя страница 18

15

Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001

3.2 Overspeed Detection Device

The Overspeed Detection Device engages wire rope when platform suddenly falls. Once
Overspeed Detection Device activates, the platform would not descend due to electric
interlock. You can confirm the activation visually by the indicator lamp (RED) on the hoist.
During the activation, you can ascend but not descend. The indicator lamp (RED) on the
Overspeed Detection Device is lit, when pressing

“Down” Button.

WARNING

When platform suddenly falls and the Overspeed Detection Device activates, only
trained and authorized personnel are allowed to reset this device.

Contact the local

authorized BISOMAC308 distributor and wait for rescue of the operators on the platform.
Improperly resetting the device may result in the platform falling and titling, allowing
persons or things to fall and possibly resulting in serious injury, death or damage.

FUNCTION

DESCRIPTION

A

Extension Bracket and

Special Bolts/Washers/Nuts

Use to attach Overspeed Detection Device and Extension

Bracket to BISOMAC308 (Bolt Q’ty: 4 pieces)

B

Reset Lever

Use for resetting the Overspeed Detection Device.

NOTE: When huge power applies to the Device such

as shock load, attempt to reset forcibly, the Safety Pin

in the Lever will damage and will not allow resetting

the Lever.

C

Governor Inspection Window

Confirm Rotating of Governor

D

Manual Trip Button

This Trip Button is for manual activation of the Overspeed

Detection Device.

E

Overspeed Indicator

In case of activation of the Overspeed Detection Device,

the Indicator is lit when pressing “Down” Button.

D

B

C

A

E

D

«
...
16
17
18
19
20
...
»

Содержание BISOMAC308



























































Отзывы:

Нет отзывов