Nihon Bisoh BISOMAC308, Руководство оператора, Страница: 34 / 58

31
Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
6.4 How to Reset Overspeed Detection Device
WARNING
DO NOT reset the Overspeed Detection Device until the safety is confirmed .
This may cause the platform to fall or tilt, and consequently operators or objects might
fall, resulting in serious injury, death or damage to operators or passers-by.
Please follow the following instructions how to Reset Overspeed Detection Device.
A) Push “UP” button and reel in wire rope approx. 2in (5cm).
B) Push the Reset Lever downward to reset the Overspeed Detection Device.
(Fig.8)
NOTE: It makes easier to do this while pushing the “UP” button of the Hoist.
C) Confirm whether the Overspeed Detection Device properly is reset.
•
The indicator lamp (RED) on the Overspeed Detection Device’s is not lit.
•
The Overspeed indicator lamp (RED) on the Hoist is not lit. (Fig.9)
When the Overspeed Detection Device is activated, the Rest Lever is
the up position shown as Fig.8. It set to the horizontal position and hides
the Indicator Lamp, when it is reset.
Fig. 8
Fig. 9
Reset Lever
Indicator Lamp (RED)
Overspeed Indicator Lamp
(RED) on the Hoist