Nihon Bisoh BISOMAC308, Руководство оператора, Страница: 19 / 58

Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
16
4. WORK ENVIRONMENT
Many work environments contain contaminants that could adversely affect the
performance of the BISOMAC308 and the Safety devices. Perform the daily tests
described in Section 7 to ensure that the BISOMAC308 is operating properly. If
contaminants such as paint, epoxy, cement, corrosive chemicals or sand blasting is
present at the work site,
use the protective cover for BISOMAC308 and the
safety devices in accordance with instructions and precautions below on this
page.
The protective cover may obstruct some or all of the safety warnings and instruction
labels on the BISOMAC308 and the safety devices. Before operating the
BISOMAC308 and the safety devices equipped with the protective cover, the
operator must remove the protective cover and read and understand all of the labels
on the BISOMAC308. Each new operator must fully understand all warning and
instruction labels before operating the BISOMAC308.
WARNING
ALWAYS test and inspect (Section 7) the BISOMAC308 on a daily basis
especially in work environments contains contaminants. Maintain hoist (see
Maintenance Manual) after completing work at each work site to remove dusts
and foreign objects inside of the hoist.
Improper maintenance may result in the
platform falling or tilting, allowing persons or things to fall or tilt and possibly resulting in
serious injury, death or damage.
WARNING
NEVER use the BISOMAC308 in an explosive atmosphere, under water, or in a
marine environment.
Especially, use in explosive or wet atmospheres could result in
serious injury or death from fire, explosions, or electric shock.
NOTE: An explosive atmosphere is one in which flammable gases or vapors or small
particles are or may be present in the air in quantities sufficient to produce an
explosive or ignitable mixture.
CAUTION
Prolonged use of the BISOMAC308 with the protective cover in place may result
in the motor overheating due to restricted air supply.
This can cause the
BISOMAC308 to stop moving. When using the protective cover, be sure that the
cooling fan has an unobstructed air supply to the motor and the motor is not
overheated.
NOTE: Make sure to use the protective cover for BISOMAC308 and the safety
devices, if contaminants such as paint, epoxy, cement, corrosive chemicals or sand