Height Rider/SP Series
Operating & Safety Instructions
English/USA – 01/18
Original instructions
33
4.3.5
OPERATION
BEFORE OPERATING THE NIFTYLIFT ENSURE THAT EACH OPERATOR HAS READ
AND FULLY UNDERSTOOD THE OPERATING MANUAL. FAILURE TO DO SO MAY
RESULT IN DEATH OR SERIOUS INJURY.
ALL MODELS
1)
NEVER
exceed the maximum platform capacity.
2)
Check below, above and around the platform for any obstruction or hazards before operating
any function.
3)
Ensure all red emergency stops are out.
4)
Turn key switch at ground control station to
Platform
(fully clockwise).
5)
Depress the footswitch or push and hold green power button on the platform control panel.
6)
Select one or more functions and operate the appropriate proportional paddles (levers) in full
accordance with manufacturers operating and safety manual.
7)
To return control to the base, turn the base control key-switch to the
Base
position (centre).
8)
When not in use return booms to the stowed position. Turn key switch on the ground control
station to the fully anti-clockwise
OFF
position, remove key and chock wheels.
ALWAYS ENSURE THE AERIAL PLATFORM IS ON A FIRM LEVEL SURFACE AND
THE AREA IS FREE OF ANY OVERHEAD OBSTRUCTIONS.
ENGAGING THE RED EMERGENCY STOP BUTTON WILL SHUT DOWN THE
ELECTRIC CIRCUIT, PREVENTING OPERATION OF ANY FUNCTION.
EMERGENCY PROCEDURES
1)
Push in red emergency stop to shut down
all
machine movement.
2)
Release
both emergency stops to restore normal controls.
In the event that the controls fail or the cage overload is activated as described in Section 5.3, the
booms can be operated from the cage location as described below:
1)
Press
white override button
situated on the cage console. (Refer to Section 4.3.1)
2)
Activate a single desired function paddle.
(Note: Multiple boom function is not available in override mode).
3)
If the cage has contacted a fixed object and cage overload has disabled the machine, move
machine slightly using steps 1-2. The overload alarm and visual warning will cease and normal
controls are available.
4)
Use normal controls if available for the fastest recovery time. Press the green button or
footswitch and operate the desired function lever(s).
Содержание HR 12
Страница 77: ......
