Height Rider/SP Series
Operating & Safety Instructions
English/USA – 01/18
Original instructions
16
3.3.3
MONTHLY SAFETY CHECKS
1)
Check the engine oil level. Check wheel nuts are secured (torque 99ft lbs / 134Nm).
2)
Check that the slew worm is secured and correctly in mesh. Clean and re-grease.
3)
Check the track rod linkages.
4)
Inspect brakes for operation and wear.
5)
Inspect the engine fuel tank for damage or leaks.
6)
Check telescopic boom wear pads and nylon studs (if applicable).
7)
Every
Six
months perform a
thorough examination
in accordance with the ‘Lifting Operation
and Lifting Equipment Regulations’ (LOLER) 1998, Regulation (9)(3)(a).
3.3.4
ANNUAL SAFETY CHECKS
1)
Check that all pivot pins and their tag bolts are secure.
2)
Inspect for any cracks or badly rusted areas on booms and chassis.
3)
Change the hydraulic oil filters.
4)
Check the bushes in the front wheel hubs for wear.
5)
Check that slew ring bolts are secure (torque 205ft lbs. 279Nm).
Tough
cage
Niftylift
tough
cage is fully UV stabilised for outdoor use in the most demanding climates. However, the
user and machine owner should consider the following;
Discolouration of the material may occur; this is a natural aging process which does not
significantly alter the material properties.
Degredation to the floor may occur as a consequence of product use and effect of UV exposure.
The
tough
cage’s multi-layer construction means degradation of the top surface may occur over
time without compromising the structural strength of the internal and base layers.
The rate at which the
tough
cage floor ages is dependent upon the machines application and its
country of use (Typical levels of UV exposure). Refer to table below for aging rate applicable to your
specific area.
UK, NETHERLANDS, GERMANY, POLAND, SCANDINAVIA, CANADA, RUSSIA
14 years
FRANCE, ITALY, USA (NORTH EAST STATES)
11 years
SPAIN, GREECE, TURKEY, CHINA, USA (MID WEST STATES), AUSTRALIA (TASMANIA)
9.5 years
MALAYSIA, INDONESIA
8 years
Содержание HR 12
Страница 77: ......