Nidek Medical RT-5100 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 76

background image

2 - 1

MRT10*RDA001A/E

§2 SAFETY PRECAUTIONS

<

General precautions

>

• Only the service persons who are accustomed to using tools, and have a deep knowledge of

this instrument are allowed to repair the instrument.

• Proceed right work in accordance with the procedure.

If not, accidents or failure of the instrument may result.

• When performing maintenance works, turn off the power switch, and disconnect the power

cord from the wall outlet unless necessary.

• Never wipe the covers, etc. using an organic solvent such as a paint thinner.

The surface may be ruined, and as a result, the appearance of the instrument will be impaired.

<Maintenance precautions>

• In case of instrument malfunction, turn the power switch off after checking the symptom.
• Never drop parts or screws inside the instrument, nor bump it against the surrounding objects.
• Have storage cases ready to ensure the loss of the removed screws or parts.
• In screwing or unscrewing, use a proper tool for the screw
• After loosening the screws fixed by a thread-locking adhesive, and tightening them again, be

sure to apply the thread-locking adhesive to them.

• After replacing parts, make sure that they are fixed securely before turning on the power.
• If you observe strange odors or smoke being emitted from the instrument, immediately turn

off the instrument and locate the causes after disconnecting the power cord from the wall-
outlet.
If the instrument is continuously powered under such abnormal conditions, a fire, electric
shock or total loss of the instrument may result.

• Referring to “8.1 Wiring diagram” and “8.2 Connector cables”, check cables for the following:

1. Connectors are connected securely.
2. No contact failure occurs after re-connection of connectors.
3. No failure in soldering
Do not pull the cables strongly. It may cause a breaking of wire.
Never work with wet hands. It may result in an electric shock or instrument malfunction.

<

Adjustment precautions

>

• Perform adjustment work in a vibration-free, flat and stable place.

Tilted floor or vibratory place may affect a proper adjustment adversely.

• Do not use an adjustment jig for other usage described in this manual.

• Be sure to readjust the optical axis of the prism and cylinder after performing the marked (

)

procedures. The special jigs (the chart projector and the test scale for checking) are necessary
for the readjustment.

«
...
5
6
7
8
9
...
»

Содержание RT-5100













































































Отзывы:

Нет отзывов

Похожие инструкции для RT-5100

Бренд: ZOLL Страницы: 5

Бренд: Accu-Chek Страницы: 3

Бренд: iBin Страницы: 2

Бренд: Eclipse Combustion Страницы: 46

Бренд: Bard Страницы: 2

Бренд: NARGESA Страницы: 50

Бренд: Landoll Страницы: 52

Бренд: Gason Страницы: 110

Бренд: Cadex Страницы: 300

Бренд: Raven Страницы: 17

Бренд: Campbell Страницы: 12

BODY ARMOR PRO TERM

Бренд: Darco Страницы: 6

Бренд: Gardner Bender Страницы: 8

Бренд: NARIKA Страницы: 2

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: RAMVAC Страницы: 53

Бренд: LABORIE Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды