Nidek Medical RT-5100, Руководство по обслуживанию

Страница: 19 / 76

4 - 9
MRT10*RDA001A/E
4.2.4 The PD and convergence of the MB is not initialized properly.
Set the MB initial pulse to a proper one. (See 7.2.1.)
Is the MB initial pulse the same as the one on the label
attached to the upper rear cover (34085-2900)?
Turn OFF the main switch. Does the driving gear of
the step-out motor turn smoothly when turning it by
hand?
Adjust the engagement of the PD gear that does not
turn smoothly.
No
Yes
No
Does the PI sensor board (34085-BA08) for PD of the
upper brace R (34085-2500) break?
Does the PI sensor board (34085-BA08) for CON of
the upper brace R (34085-2500) break?
Replace the PI sensor board (34085-BA08) for PD of
the upper brace R (34085-2500). (See 6.9.2.1.)
Replace the PI sensor board (34085-BA08) for CON of
the upper brace R (34085-2500). (See 6.9.1.1.)
Yes
Replace the MB main board (34085-BA01). (See 6.17.)
Yes
No
Yes
No
Does the PI sensor board (34085-BA08) for PD of the
upper brace L (34085-2600) break?
Does the PI sensor board (34085-BA08) for CON of
the upper brace L (34085-2600) break?
Replace the PI sensor board (34085-BA08) for PD of
the upper brace R (34085-2600). (See 6.9.2.2.)
Replace the PI sensor board (34085-BA08) for CON of
the upper brace L (34085-2600). (See 6.9.1.2.)
Yes
No
Yes
No