43
CHECK AND ADJUSTMENT PROCEDURES
:
Bevel Position Adjustment
3
3.9
Bevel Position Adjustment
■
The bevel position can be moved toward the front or back by changing the bevel position parame-
ter for a lens being processed in Auto mode.
1
Check the bevel position.
1) Load the circle 45 internal data (see “3.2.2 Loading the shape for adjustment” (page 17))
and in Auto mode, process a lens of a thickness commonly used.
2) Check the bevel position of the processed lens.
To move the bevel position toward front or back, adjust the bevel position in the following proce-
dure.
2
Display the menu screen in service mode.
See“3.2.1 Entering service mode” (page 16).
3
Press the Grinding tab on the menu
screen.
The Grinding screen is displayed.
1) Press the Adjustment button.
2) Press the "Bevel position" numeric
field.
The numeric field turns orange and the
numeric keypad appears.
3) Change the parameter value.
Enter the value and press the
button with the numeric keypad.
Decrease the numeric value.
⇒
The bevel moves toward the front surface.
Increase the numeric value.
⇒
The bevel moves toward the rear surface.
Example) To move the bevel position toward the rear
surface by 0.5 mm, decrease the value by 0.50.
4
Press the Exit tab to return to the layout screen.
5
Repeat Steps 1 to 4 until the bevel is produced in the proper position.
3
1)
1)
2)
2)
Decrease the value. Increase the value.
Содержание ME 1200
Страница 6: ...IV ...
Страница 10: ...2 REQUIREMENTS Requirements ...
Страница 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
