36
CHECK AND ADJUSTMENT PROCEDURES
:
Polishing Adjustment
3.8
Polishing Adjustment
3.8.1
Lens edge is left unpolished or burnt
■
Check the bevel polished surface of a plastic lens processed with the circle 45 internal data. If the
lens edge is left unpolished or burnt, change the Polish differential parameter.
1
Change the Polish differential parameter.
1) Display the menu screen in service mode.
See “3.2.1 Entering service mode” (page 16).
2) Press the Grinding tab on the menu
screen.
The Grinding screen is displayed.
3) Press the Adjustment button.
4) Press the Size button.
5) Press the "Polish differential" button.
6) Press the "CR39, Bevel" numeric
field.
The numeric keypad appears.
7) Change the parameter value with the
numeric keypad. Enter the value and
press the
button.
When the lens edge is left unpolished,
increase the Polish differential parameter by 0.05.
When the lens edge is burnt,
decrease the parameter by 0.05.
2
Press the Exit tab to return to the layout screen.
2)
2)
3)
3)
4)
4)
6)
6)
5)
5)
Содержание ME 1200
Страница 6: ...IV ...
Страница 10: ...2 REQUIREMENTS Requirements ...
Страница 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
