Nidek Medical ICE mini, Руководство оператора

Страница: 59 / 93

49
OPERATING PROCEDURES
:
Shape Change Function
2
Shape change by dragging
1) Click the area to be changed with the
touch pen and change it to the desired
shape.
When dragging starts, the numeric values dis-
appear and the changed shape is displayed in
red.
Change is performed so that the other areas
are connect to the maximum point dragged in a
smooth curve.
2) Lifting the touch pen from the screen after
dragging confirms the shape change and
displays the post-change numeric values.
3) Check the post-change shape on the screen.
6
After changing the lengths, press the EXIT button.
The changed lens shape is saved and the screen returns to the layout screen.
{ Hole positions after shape change
When lens shapes are changed, the set hole positions are changed under the following con-
ditions:
• The cross in solid lines represents the frame center of the original shape data. Once the
shape is changed, it is updated but the frame center (cross) is not be updated.
The frame center is updated after the changed shape data is saved.
Horizontal
direction
Calculates the pre-change H-edge hole positions and moves so that the
H-edge ratios are preserved.
Vertical direction
Fixes the position to the frame center determined before the change.
When the Shape Editor screen is displayed after the change, the coordinates
from the center moved by the change are displayed.
Shape Editor
':+6
%NGCT
5VGR
(KZ#TKC
During dragging
Shape Editor
':+6
%NGCT
5VGR
(KZ#TKC