Nidek Medical ICE mini, Руководство оператора

Страница: 18 / 93

8
BEFORE USE : Displays
Save
Saves the entered JOB data (or PTN data) into the internal memory.
Load
Loads the JOB data (or PTN data) saved in the internal memory to display it on the LCD touch screen.
Pressing the [<<] or [>>] button next to the Load button loads the saved JOB data (or PTN data) in turn.
The [>>] button is for ascending order and the [<<] button is for descending order.
Tracer
Displays data measured by the tracer on the LCD touch screen.
MENU
Displays the pop-up menu that includes the two options of initial screen memorization and shape change.
When this button is pressed for about three seconds, the Parameter 1 screen for ICE mini customizing
appears.
Right/Left indication
Specifies the lens data for the left-eye or right-eye.
The lower indicates the circumference (
∫
) and minimum lens diameter (
φ
).
Cup mark
Indicates the outer shape of the lens cup to be blocked.
Set the cup mode on the Parameter 1 screen depending on the specifications of the lens edger used. The
parameter has three options: STD (Standard), Pliable, and Mini.
When STD is selected, set the outer dimensions of the lens cup respectively for the standard lens cup and the cup
for half-eye lens. The shape of the lens cup for half-eye lens changes to an oblate ellipse depending on the lens
shape size and lens layout data.
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩 ь㧩
Ǿ㧩
6'56
%4
5CXG
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
2NCUVKE
5($ 2QNKUJ
)WKFG
4+)*6 .'(6
/WNVK
.QCF 6TCEGT
MENU
Right/Left indication
Cup mark
Alignment scale
Frame center mark
Magnification
Save
Load
Tracer
Lens material
Lens type
Frame type
Safety beveling
Polishing