Nidek Medical ICE mini, Руководство оператора

Страница: 32 / 93

22
OPERATING PROCEDURES
:
Operating Procedures
3
Enter the lens layout data.
See “2.3.2 Entering lens layout data for lenses other than Multi” (Page 37) or “2.3.3 Entering
lens layout data for bifocal lenses” (Page 44) for the lens layout data entry procedure.
4
When blocking the single vision lens, mark it using a lensmeter according to prescription.
5
Set the lens cup with the double-coated adhe-
sive tape into the cup holder.
Insert the lens cup as far as it will go aligning
the top mark with the circle on the holder.
When the displayed cup mark is oblate
ellipse, be sure to use the lens cup for half-
eye lens.
To use the lens cup for half-eye lens, the dou-
ble-coated adhesive tape for the lens cup for
half-eye lens is necessary.
When using normal double-coated adhesive
tape, trim away the excess part along the
edge of the cup.
• Suction cups are not available. Use only the lens cups (with adhesive tapes).
Top mark
Standard lens cup
Pliable lens cup
Trim away
Trim away
Double-coated adhe-
sive tape for the lens
cup for half-eye lens
Double-coated adhe-
sive tape