manualshive.com logo in svg

Nidek Medical ICE mini, Руководство оператора

Поделиться
Скачать
Nidek Medical ICE mini Скачать руководство пользователя страница 3

I

:

Use this instrument properly and safely.

Safety precautions

BEFORE USE, READ THIS MANUAL.

This operator's manual includes operating procedures, safety precautions and
specifications for the Nidek Intelligent Blocker ICE mini. IEC standards are applied in this
manual.

The cautions for safety and operating procedures must be thoroughly understood before
using the instrument.

Keep this manual handy for verification.

If you encounter any problems or have questions about the software, please contact
NIDEK or your authorized distributor.

In this manual, a signal word is used to designate the degree or level of safety alerting. The def-
inition is as follows.

CAUTION

• Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury or property damage accident.

Even situations that are labeled 

 

CAUTION

 may result in serious injury under certain condi-

tions. Safety must be followed strictly at all times.

Содержание ICE mini






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды