Nidek Medical ICE mini, Руководство оператора

Страница: 53 / 93

43
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Lens Layout Data
2
Setting alignment scale
The height of the horizontally long ellipse and the spacing between the horizontal lines of the alignment
scale can be changed by the corresponding parameters.
See “4.1 Parameter Settings” (Page 63) for the parameter setting procedure.
Alignment scale: (A in the figure)
Select the spacing between horizontal lines: 0
mm, 1.0 mm, 2.0 mm, or 3.0 mm.
When the setting is other than 0 mm, the num-
ber of horizontal lines displayed is determined
by how many of the set spacing can fit within 6
mm.
When 0 mm is selected, the horizontal lines
are not displayed.
Alignment mark: (B in the figure)
Select the height of the alignment mark (hori-
zontally long ellipse): 0 mm, 1.0 mm, or 2.0
mm.
When 0 mm is selected, the horizontally long
ellipse becomes a straight line.
A
B
A
B