Nidek Medical ICE mini, Руководство оператора

Страница: 36 / 93

26
OPERATING PROCEDURES
:
Operating Procedures
2.2.2 Blocker LAB system
In the Blocker LAB system, the ICE mini loads the data specified by JOB# from the server PC,
changes the layout, and blocks the lens. The data is sent to the server PC after blocking.
The memory function of the ICE mini is not available.
Each data of tracing, processing conditions, lens layout must be saved in the server PC
before blocking.
1
Enter the JOB#.
Pressing the JOB# button displays the
numeric keypad (or keyboard). Enter the
JOB# and press the Ent button.
Entering the JOB# automatically transfers the
data from the server PC. The data is dis-
played on the screen.
2
Enter the lens layout data if needed.
See “2.3.2 Entering lens layout data for lenses other than Multi” (Page 37) or “2.3.3 Entering
lens layout data for bifocal lenses” (Page 44) for the lens layout data entry procedure.
The Send button becomes operative after layout data change.
3
Block the lens.
Block the lens in the same manner as Steps 4 to 9 of “2.2.1 Blocker/LE and Mini LAB sys-
tems” (Page 21).
㧸
/'07 /'07
㧾
˜
!!!!
!!!!
ь㧩
Ǿ㧩
ь㧩
Ǿ㧩
'PV
%'
%4
5GPF
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
2NCUVKE 5($ 2QNKUJ
)WKFG
4+)*6 .'(6
/WNVK
With the numeric keypad
㧸
/'07 /'07
㧾
˜
ь㧩
Ǿ㧩 ь㧩
Ǿ㧩
%4
5GPF
(2&
2&
5K\G
2CUUKXG
9&
:
;
5QHV
2NCUVKE 5($ 2QNKUJ
)WKFG
4+)*6 .'(6
/WNVK