1
2
3
5
sec.
2
5
sec.
4
Hold down the but-
ton and
count 2 movements;
release the button.
Hold down the but-
ton and
count 4 movements;
release the button.
3
4
5
5
sec.
2
Precisely ad-
justing the
“H” posi-
tion
“
H
”
Hold down both
buttons...
count 2 movements;
release the
buttons.
Press the buttons until you reach the desired position.
5
6
...
5
sec.
3
Select one of the following potions and execute it:
• option A
– to memorise the FIRST “H” position.
• option B
– to memorise a SUPPLEMENTARY “H” position.
Hold down the but-
ton and
count 3 movements;
release the button.
option –
A
6
end
option –
B
6
end
8
sec.
4
4
Hold down both but-
tons...
count 4 movements;
release the but-
tons.
On ANOTHER transmitter, which
has NOT been memorised:
hold
down any button you wish;
count 4 movements.
C.10 - Adjusting the motor’s sensitivity to obstacles
MONO
UP
STOP
DOWN
NOTES AND WARNINGS
• This function prevents the roller shutter from remaining excessively taut at the end of the closing manoeuvre. During the final phase of this manoeuvre, the function
automatically reduces the motor traction torque, based on the factory setting or the one adjusted by the installer with the following procedure.
• The maximum allowed sensitivity level in order to have a reliable application depends on the type, weight and dimensions of the roller shutter.
• After changing the setting, the automation must complete AT LEAST three complete cycles in order to apply the chosen sensitivity level.
•
Warning! – This function is active with the factory setting but is not applicable if the limit switches are programmed with the manual procedure C.6.
1
2
3
continues
2
5
sec.
2
Select the de-
sired option
and program it
as follows
0,5
sec.
4 OPTIONS:
x 1
=
minimum
sensitivity
x 2
=
standard
sensitivity
(
Fac-
tory setting
)
x 3
=
maximum
sensitivity
x 5
= function deactivated
Press and re-
lease the but-
ton
count 2 movements;
Hold down the
button
count 2 move-
ments;
release
the but-
tons.
Press and release the button
the number of
times
indicated in the option you have chosen;
3
4
end
Note
– When performing the procedure, you
can cancel the programming at any time by
holding down
■
and
▼
together for 4 sec-
onds. Alternatively, do not press any keys and
wait 60 seconds for the motor to perform 6
movements.
10
sec.
?
1
/
2
/
3
/
4
/
5
/
5
sec.
3
After about 10 seconds, the motor performs a num-
ber of
movements
equal to the number of pulses
entered.
Hold down the but-
ton and
count 3 movements;
release the but-
ton.
C
English –
34
