B.12 - Adjusting the roller shutter’s cruising speed
MONO
NOTES AND WARNINGS
•
For the values of the three options available (minimum, nominal and maximum speed), consult the “Technical specifications” chapter.
•
To assess whether the chosen option for the cruising speed is compatible with the roller shutter’s characteristics (weight, roller dimensions, torque required), refer to
the “Technical specifications” chapter.
•
The “nominal speed” option is the factory setting.
1
2
3
4
PRG
(x
1
)
2
PRG
(x
1
)
2
=
5
sec
3
Press and release
the button (
1 time
);
count 2 movements.
Press and release
the button (
1 time
);
count 2 movements.
Hold down the but-
ton and;
release them after
5 seconds
;
count 3 movements.
4
continues
Select the desired op-
tion and program it as
follows
(x
...
)
5 OPTIONS:
1 press
= sets the
MINIMUM speed
.
2 presses
= sets the
... speed
.
3 presses
= sets the
NOMINAL speed (
Factory setting
)
.
4 presses
= sets the
... speed
.
5 presses
= sets the
MAXIMUM speed
.
Press and release the button
the number of times
indicated in the option you have chosen;
4
5
end
7
sec.
?
1
/
2
/
3
/
=
5
sec
3
After about 7 seconds, the motor performs a num-
ber of
movements
equal to the number of pulses
entered.
Hold down the button and
release it after
5 seconds
;
count 3 movements.
B
GENERAL INFORMATION ABOUT PROCEDURES “B.12”, “B.13”, “B.14”
The “Roller shutter cruising speed (procedure B.12)”, “Total manoeuvre duration (procedure B.13)” and “Adjustment of the
Soft-Start / Soft-Stop movement (procedure B.14)” functions can be used to fully customise every aspect of the roller shut-
ter’s movement, including alignments and other effects that are useful especially when multiple roller shutters are installed
close to one another, with different sizes and rollers of different diameters, or for making the shutter’s movement more silent.
• The “Total manoeuvre duration (procedure B.13)” and the “Roller shutter cruising speed (procedure B.12)” functions are
interdependent:
the last function set determines the actual cruising speed of the roller shutter.
• After setting the desired
manoeuvre time
(procedure B.13), the system automatically adjusts the
cruising speed
(while
also accounting for the set
acceleration/deceleration
) to ensure that the manoeuvre lasts exactly the set time.
If the
Soft-Start / Soft-Stop movement
(procedure B.14) is then modified, or the
limit switch positions
(procedure
B.3 / B.5), the
manoeuvre duration
remains unchanged and the system adjusts the roller shutter’s
cruising speed
ac-
cordingly.
• When setting the desired
manoeuvre duration
(procedure B.13), if the resulting
cruising speed
is outside the allowed
range (see the values given in “Technical specifications”), the motor will signal the error by moving 6 times at the end of
the procedures (B.3 / B.5 / B.14), and will automatically restore the
cruising speed
to its nominal value.
• After setting the
cruising speed with procedure B.13
, changing the
limit switch positions
(procedure B.3 / B.5) or
the
Soft-Start / Soft-Stop movement
(procedure B.14) may set the
cruising speed
outside the allowed range (given
in the “Technical specifications”). In such cases, the motor will signal the error by moving 6 times at the end of the proce-
dures (B.3 / B.5 / B.14) and will automatically restore the
cruising speed
to its nominal value.
25
– English
