A.5 - SEMIAUTOMATIC programming of the UP (“0”) and DOWN (“1”) limit switches
BiDi
NOTES AND WARNINGS
• Use this procedure solely for roller shutters with mechanical Up “0” limit switch stop.
•
If, previously, the limit switches were programmed with the “Manual (A.3)” programming, to complete this procedure before proceeding with the “Total or partial de-
letion of the memory [B.11.1 (motor configured for ONE-WAY communication), A.10.1 (motor configured for TWO-WAY communication) or C.4.1 (motor configured
for ONE-WAY communication and OLD generation transmitter lacking the PRG and ESC keys) option ‘A’ or ‘D’]”.
•
If the limit switches have not been programmed yet, the roller shutter’s direction of movement might not match the pressed button.
• After the limit positions have been programmed, the roller shutter can be controlled by simply pressing the appropriate buttons on the control unit. The Up movement
will be limited when the roller shutter impacts against the mechanical lock (box) in the Upper limit switch “0”. With each impact, the height of this limit switch will be
automatically updated by the “Automatic limit switch update” function (paragraph 5.4). Conversely, the Down movement will be limited by the Lower limit switch “1”
(limit switch set by the installer at a desired point).
1
2
continues
Command
an UP
movement
( )
“
0
”
( )
Command
an DOWN
movement
( )
Hold down the button
▲
(or
▼
) and wait ...
... wait for the roller shutter to be stopped
when it collides with the box (= UP
limit
switch
= position “
0
”).
release the button.
Hold down the button
▼
(or
▲
) and wait ...
2
3
4
5
“
1
”
( )
(x
1
)
PRG
2
=
5
sec
2
... release the button as soon as the roller shutter
reaches
position “1”
(
DOWN
limit switch).
Press and release
the button (
1 time
);
count 2 movements.
Hold down the but-
ton and
release it after
5
seconds
;
count 2 movements.
5
6
end
Finely adjust-
ing the posi-
tion of limit
switch “1”
“
1
”
=
5
sec
3
Press the buttons until you reach the desired position.
Hold down the button and
release it after
5 seconds
;
count 3 movements.
A
A.4 - AUTOMATIC Programming of the UP (“0”) and DOWN (“1”) limit switches
BiDi
NOTES AND WARNINGS
• Use this procedure only for roller shutters equipped with mechanical locking devices.
• Programme the UP limit switch (0) FIRST.
• The down limit switch (1) is NOT memorised if it is within 120° with respect to the UP limit switch (0).
• If the limit switches have not been programmed yet, the roller shutter’s direction of movement might not match the pressed button.
• After programming the limit switches, the
▲
key will command the
Up
manoeuvre and the
▼
switch will command the
Down
manoeuvre. The movement of the roller
shutter will be limited by limit switches (Upper “0” and Lower “1”) programmed by the installer.
1
2
continues
Command
an UP
movement
( )
“
0
”
( )
Command
an DOWN
movement
( )
Hold down the button
▲
(or
▼
) and wait ...
... lift the roller shutter up to the upper stop.
The motor will disengage automatically
once the stop is reached.
release the button.
Hold down the button
▼
(or
▲
) and wait ...
2
end
“
1
”
( )
... lower the roller shutter down to the lower stop.
The motor will disengage automatically once the stop is reached.
A
English –
10
